Journal Publications

2021

Assessing Global Needs When Identifying Potential Engineering for Global Development Projects by Mabey, C. S., Mattson, C. A., and Dahlin, E., Journal of Mechanical Design, 2021, [In Press]

Factors Leading to Sustainable Social Impact on the Affected Communities of Engineering Service Learning Projects by Armstrong, A. G., Mattson, C. A., and Lewis, R. S., Development Engineering, 2021, Vol. 6

Nitrile cup seal robustness in the India Mark II/III hand pump system by Ottosson, H.J., Mattson, C.A., Johnson, O.K., Naylor, T.A., Development Engineering, 2021, Vol 6

Design of Remote Data Collection Devices for Social Impact Indicators of Products in Developing Countries by Stringham, B. J., and Mattson, C. A., Development Engineering, 2021, Vol. 6

Identifying high-potential work areas in Engineering for Global Development: Linking Industry Sectors to the Human Development Index by Smith, D., Mattson, C., and Dahlin, E., Journal of Mechanical Design, 2021, Vol. 143, Issue 6

2020

Evaluation of User Preferences for 3D Modeling and Design Reviews in Virtual Reality by Nysetvold, J. and Salmon, J.L., 2020

Structural Design Space Exploration Using Principal Component Analysis by Bunnell, S., Thelin, C., Bird, G., Salmon J.L. and Gorrell, S., Journal of Computing and Information Science in Engineering, Vol. 20, No. 6.,  2020  

Single Pursuer and Two Cooperative Evaders in the Border Defense Differential Game by  Salmon, J., Willey, L., Casbeer, D., Garcia, E., and Von Moll, A., Journal of Aerospace Information Systems, Vol. 17, No. 5., 2020.

Analysis of Perceived Social Impacts of Existing Products Designed for the Developing World, With Implications for New Product Development by Ottosson, H.J., Mattson, C.A., Dahlin, E.C., Journal of Mechanical Design, 2020, Vol 142, https://doi.org/10.1115/1.4044323

2019

Quantifying the Effects of Various Factors on the Utility of Design Ethnography in the Developing World by Wood, A. E. and Mattson, C. A., Research in Engineering Design

Over-Design Versus Redesign as a Response to Future Requirements by Allen, J. D., Stevenson, P. D., Mattson, C. A., and Hatch, N. W, Journal of Mechanical Design, 2019, Vol. 141 No. 3

Using a Product’s Sustainability Space as a Design Exploration Tool by Mattson, C. A., A. Pack, Lofthouse, V., and Bhamra, T., Design Science, 2019, Vol. 5, No. 1

2018

Incorporating Global and Local Customer Needs into Early Stages of Improved Cookstove Design by Thacker, K. S., Barger, K. M., and Mattson, C. A., International Journal of Product Development, 2018, Vol. 5, No 22

The Social Impacts of Products: A Review by M. Rainock, D. Everett, A. Pack, E. Dahlin, and C. A. Mattson, Impact Assessment and Project Appraisal, 2018, Vol. 36, No. 3

Towards a Universal Social Impact Metric for Engineered Products that Alleviate Poverty by Stevenson, P., Mattson, C., Bryden, D., and MacCarty, N., Journal of Mechanical Design, 2018, Vol. 140, No. 4

2017

Village Drill: A case study in engineering for global development with five years of data post market-introduction by C. A. Mattson, A. E. Wood, and J. Renouard, Journal of Mechanical Design, 2017, Vol. 139, No. 6.

Design for excess capability to handle uncertain product requirements in a developing world setting by Allen, J. D., Thacker, K. S., Mattson, C. A., and Ferguson, S. M., Research in Engineering Design, 2017, Vol. 28

Experimenting with concepts from modular product design and multi-objective optimization to benefit people living in poverty by Wasley, N. S., Lewis, P. K., Mattson, C. A., and Ottosson, H. J., Development Engineering, 2017, Vol. 2

Balancing Technical and User Objective in the Redesign of a Peruvian Cookstove by Thacker, K. S., Barger, K. M., and Mattson, C. A., Development Engineering, 2017, Vol. 2

2016

Evaluation of System Evolvability Based on Usable Excess by Allen, J. D., Mattson, C. A., and Ferguson, S. M., Journal of Mechanical Design, 2016, Vol. 138, No. 9

Identifying and Mapping Excess Relationships in Engineered Systems by Cansler, E., White, S., Ferguson, S., and Mattson, C. A., Journal of Mechanical Design, 2016, Vol. 138, No. 8

Design for the Developing World: Common Pitfalls and How to Avoid Them by Wood, A. E. and Mattson, C. A., Journal of Mechanical Design, 2016, Vol. 138, No. 3

Optimization of Excess System Capability for Increased Evolvability by Watson, J. D., Allen, J. D, Mattson, C. A., and Ferguson, S. M., Structural and Multidisciplinary Optimization, 2016, Vol. 53., No. 6

2015

L-Dominance: An Approximate-Domination Mechanism for Adaptive Resolution of Pareto Frontiers by Hancock, B. J., Nysetvold, T., Mattson, C. A., Structural and Multidisciplinary Optimization, 2015, Vol. 52, No. 2

Hybrid Bishop-Hill Model Combined Finite Element Analysis for Elastic-Yield Limited Design by Takahashi, R., Fullwood, D. T., Rampton, T. M., Skousen, D. J., Adams, B. L., and Mattson, C. A., Engineering Computations, 2015, Vol. 32, No. 6

Modular Product Optimization to Alleviate Poverty: An Irrigation Pump Case Study by Lewis, P. K., Mattson C. A., and Wood, C. D., International Journal of Product Development, 2015, Vol. 20, No. 1

2014

Nine Principles for Design for the Developing World as Derived from the Engineering Literature by Mattson C. A. , and Wood, A. E., Journal of Mechanical Design, 2014, Vol. 136, No. 12

A Model for Quantifying System Evolvability Based on Excess and Capacity by Tackett, M. W. P., Mattson, C. A., and Ferguson, S. M., Journal of Mechanical Design, 2014, Vol. 136, No. 5

Using Topology Optimization to Numerically Improve Barriers to Reverse Engineering by D. D. LeBaron and C. A. Mattson, Journal of Mechanical Design, 2014, Vol. 136, No. 2

Considering Dynamic Pareto Frontiers in Decision Making by Lewis, P. K., Tackett, M.W.P., and Mattson, C. A., Optimization and Engineering, 2014, Vol. 15, No. 4

2013

The Smart Normal Constraint Method for Directly Generating a Smart Pareto Set by Hancock, B. J., Mattson, C. A., Structural and Multidisciplinary Optimization, 2013, Vol. 48, No. 4

Usage Scenarios for Design Space Exploration with a Dynamic Multiobjective Optimization Formulation by Curtis, S. K., Hancock, B. J., and Mattson, C. A., Research in Engineering Design, 2013, Vol. 24, No. 4

An Optimization-Based Method for Designing Modular Systems that Traverse Dynamic s-Pareto Frontiers by Lewis, P. K. and Mattson, C. A., Structural and Multidisciplinary Optimization, 2013, Vol. 48, No. 5

Divergent Exploration in Design with a Dynamic Multiobjective Optimization Formulation by Curtis, S. K., Mattson, C. A., Hancock, B. J., and Lewis, P. K., Structural and Multidisciplinary Optimization, Vol. 47, No. 5

Characterizing the Effects of Learning when Reverse Engineering Multiple Samples of the Same Product by Curtis, S. K., Harston, S. P., and Mattson, C. A., Journal of Mechanical Design, 2013, Vol. 135, No. 1

2012

Propagating Skewness and Kurtosis Through Engineering Models for Low-Cost, Meaningful, Non-Deterministic Design by Anderson, T. V. and Mattson, C. A., Journal of Mechanical Design, Special Issue on Design Under Uncertainty, 2012, Vol. 134, No. 10

A Differentially Driven Flapping Wing Mechanism for Force Analysis and Trajectory Optimization by George, R. B., Colton, M. B., Mattson, C. A., Thomson, S. L., International Journal of Micro Air Vehicles, 2012, Vol. 4, No. 1

Design Space Exploration for Quantifying and Improving System Model Execution Reliability by Larson, B. H., and Mattson, C. A., Journal of Mechanical Design, 2012, Vol. 134, No. 4

A Method for Developing Systems that Traverse the Pareto Frontiers of Multiple System Concepts Over Time by Lewis, P. K., and Mattson, C. A., Structural and Multidisciplinary Optimization, 2012, 45(4)

Efficient Propagation of Error through System Models for Functions Common in Engineering by Anderson, T. V., Mattson, C. A., Larson, B. H., and Fullwood, D. T., Journal of Mechanical Design, 2012, Vol. 134

2011

Hybrid Bishop-Hill Model for Elastic-Yield Limited Design With Non-Orthorhombic Polycrystalline Metals by Takahashi, R., Prasai, D, Adams, B. L., and Mattson, C. A., Journal of Engineering Materials and Technology, 134.1, 2011

The Fundamentals of Barriers to Reverse Engineering and their Implementation into Mechanical Components by Curtis, S. K., Harston, S. P., and Mattson, C. A., Research in Engineering Design, Vol 22, 2011

A Design Optimization Strategy for Creating Devices that Traverse the Pareto Frontier Over Time by Lewis, P. K., Murray, V. R., and Mattson, C. A., Structural and Multidisciplinary Optimization, Vol. 43, No. 2, 2011

2010

A Computationally-Assisted Methodology for Preference-Guided Conceptual Design by Barnum, G. J. and Mattson, C. A., Journal of Mechanical Design, Vol. 132, No. 12, 2010

Capitalizing on Heterogeneity and Anisotropy to Design Desirable Hardware that is Difficult to Reverse Engineer by Harston, S. P., Mattson, C. A., and Adams, B. L., Journal of Mechanical Design, Vol. 132, 2010

Metrics for Evaluating the Barrier and Time to Reverse Engineer a Product by Harston, S. P., and Mattson, C. A., Journal of Mechanical Design, Vol. 132, 2010

Optimization of Near-constant Force Springs Subject to Mating Uncertainty by Meaders, J. C., and Mattson, C. A., Structural and Multidisciplinary Optimization, Vol. 41, No. 1, 2010

2009

Case Studies in Concept Exploration and Selection with s-Pareto Frontiers by Mattson, C. A., Mullur, A. A., and Messac, A., International Journal of Product Development, Special Issue on Space Exploration and Design Optimization, Vol. 9, No.1/2/3, 2009

2007

Configuration Selection, Modeling, and Preliminary Testing in Support of Constant Force Electrical Connectors by Weight, B. L., Mattson, C. A., Magleby, S. P., and Howell, L. L., ASME Journal of Electronic Packaging, Vol. 129, No. 3, 2007